JCB 527-58 Telehandler - Jcb 1-6m Lift Height Telehandler

$98,000 AUD

($107,800 AUD GST Inclusive)

Seller confirm cost

Get a Finance Quote

JCB 527-58 Telehandler - Jcb 1-6m Lift Height Telehandler Specification Download PDF brochure.

  • Make : JCB
  • Model : JCB 527-58 Telehandler
  • Subcategory : 1-6m Lift Height Telehandler
  • Fuel-Type : Diesel
  • By-Application : All Terrain Forklift
  • Rated-Capacity : 2.7 t
  • Stock ID : 148

Description

JCB 527-58
Overall height* m (ft-in) 2.00 (6-7)
Overall width (over tyres)* m (ft-in) 2.04 (6.8)
Inside width of cab m (ft-in) 0.88 (2-10)
Front track m (ft-in) 1.60 (5-3) 1
Wheelbase m (ft-in) 2.61 (8-7)
Overall length to front tyres m (ft-in) 3.73 (12-2)
Overall length to front carriage m (ft-in) 4.42 (14-6)
Ground clearance m (ft-in) 0.3 (1-0)
Front wheel centre to carriage m (ft-in) 1.20 (3-11)
Low cab 20" tyres
Rear wheel centre to rear face m (ft-in) 0.61 (2-0)
Carriage roll back angle degrees 40
Carriage dump angle degrees 40
Outside turn radius (over tyres) 4WS m (ft-in) 3.15 (10-4)
Weight kg (lb) 5900 (13007)
Tyres 308/75xR20

Maximum lift capacity kg (lb) 2700 (5952)
Lift capacity to full height kg (lb) 2000 (4408)
Lift capacity at full reach kg (lb) 1250 (2755)
Lift height m (ft-in) 5.80 (19-0)
Reach at maximum lift height m (ft-in) 0.33 (1-1)
Maximum forward reach m (ft-in) 3.00 (9-11)
Reach with 1 tonne load m (ft-in) 3.00 (9-11)
Placing height m (ft-in) 4.54 (14-11)

CAB
Quiet, safe and comfortable cab conforms to ROPS ISO 3471 and FOPS ISO 3449. Tinted glass all round, with laminated roof screen.
Roof bars, front screen and roof screen wipers and heater/screen demister. Rear opening window with wash/wipe. Audio-visual
warning system for coolant temperature, engine oil pressure, air-cleaner, battery charge, transmission oil temperature and pressure,
water in fuel, hourmeter, road speed indicator, fuel gauge, engine temperature, clock and inclinometer. Adjustable suspension seat, tilt
steer column, park brake, floor mounted throttle and brake pedals.
Hydraulic controls:
Single lever servo joystick, incorporating forward/neutral/reverse, with progressive extend/retract and auxilliary incorporating
constant flow facility.
Load Moment Indicator:
Automatic eye level audio-visual load moment indicator warning system receiving a signal from a load sensor on the rear axle.
This system continuously monitors the machine’s forward stability and leaves the operator in control at all times.

TRANSMISSION
Closed loop variable displacement pump with a continuously variable hydrostatic drive. Comprising of a mechanical gearbox,
hydraulic motor and control unit. Permanent 4 wheel drive. Travel speed: 20kph (12mph), 30kph (19mph) and 40 kph (25mph).

BRAKES
Service brakes – Hydraulically operated self-adjusting, oil-immersed in-board multi-disc type mounted on front axle.
Parking brake – Hand operated disc brake on input of axle.

STEERING
Hydrostatic power steering with power track rods on both axles.
Three steer mode options: front wheel steer; all wheel steer; crab steer; operated from in the cab by a selection lever.
Option: In cab selector switch with Auto Align.

Contact

0395435011  

Ask a question